And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:42.716
And
I configure APT to prefer an old version of cowsay
0.043
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.746
And
I accept adding "cowsay" to Additional Software
6.488
And
Additional Software is correctly configured for package "cowsay"
1.237
And
I shutdown Tails and wait for the computer to power off
6.629
And
I start Tails from USB drive "__internal" with network unplugged
1:6.152
And
I enable persistence
16.583
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.092
And
I log in to a new session
51.584
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.658
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.077
And
available upgrades have been checked
0.064
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.454
And
I can open the Additional Software configuration window from the notification
2.528
And
I shutdown Tails and wait for the computer to power off
2:2.404
And
I start Tails from USB drive "__internal" with network unplugged
1:9.167
And
I enable persistence
14.803
And
I configure APT to prefer an old version of cowsay
0.041
And
I log in to a new session
50.778
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.104
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
the network is plugged
0.148
Then
the Additional Software upgrade service has started
0.333
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.259