And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:25.640
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.264
And
I accept adding "cowsay" to Additional Software
7.292
And
Additional Software is correctly configured for package "cowsay"
0.950
And
I shutdown Tails and wait for the computer to power off
6.390
And
I start Tails from USB drive "__internal" with network unplugged
58.168
And
I enable persistence
13.574
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.082
And
I log in to a new session
44.270
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.266
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.066
And
available upgrades have been checked
2.353
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.571
And
I can open the Additional Software configuration window from the notification
3.610
And
I shutdown Tails and wait for the computer to power off
2:3.413
And
I start Tails from USB drive "__internal" with network unplugged
1:7.527
And
I enable persistence
14.979
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
44.311
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.580
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.079
And
the network is plugged
0.081
Then
the Additional Software upgrade service has started
0.191
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.089