And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.008
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.155
And
I accept adding "cowsay" to Additional Software
4.006
And
Additional Software is correctly configured for package "cowsay"
0.661
And
I shutdown Tails and wait for the computer to power off
4.685
And
I start Tails from USB drive "__internal" with network unplugged
34.221
And
I enable persistence
11.862
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.076
And
I log in to a new session
7.758
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.224
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.037
And
available upgrades have been checked
1.091
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.444
And
I can open the Additional Software configuration window from the notification
2.723
And
I shutdown Tails and wait for the computer to power off
18.071
And
I start Tails from USB drive "__internal" with network unplugged
34.221
And
I enable persistence
11.174
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
8.301
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.167
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.029
Then
the Additional Software upgrade service has started
0.060
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.079