And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.495
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.411
And
I accept adding "cowsay" to Additional Software
4.956
And
Additional Software is correctly configured for package "cowsay"
0.624
And
I shutdown Tails and wait for the computer to power off
4.284
And
I start Tails from USB drive "__internal" with network unplugged
35.089
And
I enable persistence
12.181
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.068
And
I log in to a new session
8.465
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.492
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
I prepare the Additional Software upgrade process to fail
0.084
And
the network is plugged
0.031
And
available upgrades have been checked
0.039
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.930
And
I can open the Additional Software configuration window from the notification
2.680
And
I shutdown Tails and wait for the computer to power off
17.925
And
I start Tails from USB drive "__internal" with network unplugged
33.473
And
I enable persistence
12.709
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.956
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.217
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.029
Then
the Additional Software upgrade service has started
0.087
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.052