And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.215
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.880
And
I accept adding "cowsay" to Additional Software
5.074
And
Additional Software is correctly configured for package "cowsay"
0.599
And
I shutdown Tails and wait for the computer to power off
2.778
And
I start Tails from USB drive "__internal" with network unplugged
34.527
And
I enable persistence
11.986
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.045
And
I log in to a new session
8.203
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.206
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.041
And
available upgrades have been checked
0.041
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.389
And
I can open the Additional Software configuration window from the notification
2.411
And
I shutdown Tails and wait for the computer to power off
13.156
And
I start Tails from USB drive "__internal" with network unplugged
33.929
And
I enable persistence
11.969
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.837
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.151
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.033
Then
the Additional Software upgrade service has started
0.041
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054