And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.810
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.090
And
I accept adding "cowsay" to Additional Software
4.176
And
Additional Software is correctly configured for package "cowsay"
0.660
And
I shutdown Tails and wait for the computer to power off
2.607
And
I start Tails from USB drive "__internal" with network unplugged
31.633
And
I enable persistence
10.451
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
7.492
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.141
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
I prepare the Additional Software upgrade process to fail
0.035
And
the network is plugged
0.035
And
available upgrades have been checked
1.097
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.943
And
I can open the Additional Software configuration window from the notification
2.370
And
I shutdown Tails and wait for the computer to power off
12.626
And
I start Tails from USB drive "__internal" with network unplugged
31.123
And
I enable persistence
10.557
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.167
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.145
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
the network is plugged
0.047
Then
the Additional Software upgrade service has started
0.037
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.050