And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.193
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.726
And
I accept adding "cowsay" to Additional Software
3.964
And
Additional Software is correctly configured for package "cowsay"
0.396
And
I shutdown Tails and wait for the computer to power off
2.517
And
I start Tails from USB drive "__internal" with network unplugged
32.159
And
I enable persistence
10.430
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.034
And
I log in to a new session
7.143
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.185
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.026
And
available upgrades have been checked
0.038
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.442
And
I can open the Additional Software configuration window from the notification
2.541
And
I shutdown Tails and wait for the computer to power off
17.656
And
I start Tails from USB drive "__internal" with network unplugged
31.554
And
I enable persistence
10.942
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.728
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.149
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
the network is plugged
0.033
Then
the Additional Software upgrade service has started
0.059
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.074