And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:10.626
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.699
And
I accept adding "cowsay" to Additional Software
3.964
And
Additional Software is correctly configured for package "cowsay"
0.459
And
I shutdown Tails and wait for the computer to power off
4.030
And
I start Tails from USB drive "__internal" with network unplugged
31.800
And
I enable persistence
10.245
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
6.509
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.162
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.028
And
the network is plugged
0.036
And
available upgrades have been checked
1.156
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.272
And
I can open the Additional Software configuration window from the notification
2.431
And
I shutdown Tails and wait for the computer to power off
12.400
And
I start Tails from USB drive "__internal" with network unplugged
31.977
And
I enable persistence
10.647
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.528
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.142
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.025
And
the network is plugged
0.038
Then
the Additional Software upgrade service has started
0.034
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055