And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.600
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.570
And
I accept adding "cowsay" to Additional Software
4.116
And
Additional Software is correctly configured for package "cowsay"
0.510
And
I shutdown Tails and wait for the computer to power off
3.969
And
I start Tails from USB drive "__internal" with network unplugged
31.565
And
I enable persistence
10.102
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
7.119
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.182
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.040
And
the network is plugged
0.035
And
available upgrades have been checked
0.039
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.861
And
I can open the Additional Software configuration window from the notification
2.590
And
I shutdown Tails and wait for the computer to power off
12.719
And
I start Tails from USB drive "__internal" with network unplugged
31.800
And
I enable persistence
10.500
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.456
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.148
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
the network is plugged
0.031
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.047