And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.867
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.934
And
I accept adding "cowsay" to Additional Software
3.982
And
Additional Software is correctly configured for package "cowsay"
0.448
And
I shutdown Tails and wait for the computer to power off
2.496
And
I start Tails from USB drive "__internal" with network unplugged
31.549
And
I enable persistence
9.999
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.041
And
I log in to a new session
6.672
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.187
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.036
And
the network is plugged
0.026
And
available upgrades have been checked
0.039
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.828
And
I can open the Additional Software configuration window from the notification
2.594
And
I shutdown Tails and wait for the computer to power off
12.458
And
I start Tails from USB drive "__internal" with network unplugged
32.406
And
I enable persistence
10.332
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.519
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.174
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
the network is plugged
0.034
Then
the Additional Software upgrade service has started
0.039
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057