And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.605
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.520
And
I accept adding "cowsay" to Additional Software
4.928
And
Additional Software is correctly configured for package "cowsay"
0.512
And
I shutdown Tails and wait for the computer to power off
2.539
And
I start Tails from USB drive "__internal" with network unplugged
32.710
And
I enable persistence
10.691
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.037
And
I log in to a new session
7.830
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.169
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.028
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.033
And
available upgrades have been checked
0.054
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.354
And
I can open the Additional Software configuration window from the notification
2.434
And
I shutdown Tails and wait for the computer to power off
17.934
And
I start Tails from USB drive "__internal" with network unplugged
33.113
And
I enable persistence
10.486
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.905
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.183
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.036
Then
the Additional Software upgrade service has started
0.040
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068