And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.360
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.862
And
I accept adding "cowsay" to Additional Software
5.067
And
Additional Software is correctly configured for package "cowsay"
0.699
And
I shutdown Tails and wait for the computer to power off
4.139
And
I start Tails from USB drive "__internal" with network unplugged
33.601
And
I enable persistence
10.714
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.041
And
I log in to a new session
8.333
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.167
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.035
And
available upgrades have been checked
0.079
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.702
And
I can open the Additional Software configuration window from the notification
2.578
And
I shutdown Tails and wait for the computer to power off
12.722
And
I start Tails from USB drive "__internal" with network unplugged
32.763
And
I enable persistence
11.574
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
7.958
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.510
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.025
Then
the Additional Software upgrade service has started
0.037
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061