And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.718
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.157
And
I accept adding "cowsay" to Additional Software
4.296
And
Additional Software is correctly configured for package "cowsay"
0.621
And
I shutdown Tails and wait for the computer to power off
4.035
And
I start Tails from USB drive "__internal" with network unplugged
35.528
And
I enable persistence
12.876
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.078
And
I log in to a new session
7.134
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.490
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.079
And
the network is plugged
0.029
And
available upgrades have been checked
0.041
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.367
And
I can open the Additional Software configuration window from the notification
2.541
And
I shutdown Tails and wait for the computer to power off
12.848
And
I start Tails from USB drive "__internal" with network unplugged
34.761
And
I enable persistence
12.626
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
8.932
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.183
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.040
Then
the Additional Software upgrade service has started
0.042
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.040