And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.007
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.691
And
I accept adding "cowsay" to Additional Software
4.072
And
Additional Software is correctly configured for package "cowsay"
0.523
And
I shutdown Tails and wait for the computer to power off
2.553
And
I start Tails from USB drive "__internal" with network unplugged
31.751
And
I enable persistence
10.168
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
6.337
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.365
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.040
And
the network is plugged
0.028
And
available upgrades have been checked
0.037
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.795
And
I can open the Additional Software configuration window from the notification
2.386
And
I shutdown Tails and wait for the computer to power off
17.596
And
I start Tails from USB drive "__internal" with network unplugged
31.552
And
I enable persistence
10.167
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.102
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.185
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
the network is plugged
0.031
Then
the Additional Software upgrade service has started
0.031
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.049