And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.896
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.411
And
I accept adding "cowsay" to Additional Software
5.416
And
Additional Software is correctly configured for package "cowsay"
0.693
And
I shutdown Tails and wait for the computer to power off
3.914
And
I start Tails from USB drive "__internal" with network unplugged
35.558
And
I enable persistence
13.819
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
8.732
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.248
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.035
And
available upgrades have been checked
0.047
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.348
And
I can open the Additional Software configuration window from the notification
2.503
And
I shutdown Tails and wait for the computer to power off
18.060
And
I start Tails from USB drive "__internal" with network unplugged
34.687
And
I enable persistence
11.773
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
9.251
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.184
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.027
Then
the Additional Software upgrade service has started
0.065
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.072