And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.943
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.431
And
I accept adding "cowsay" to Additional Software
4.268
And
Additional Software is correctly configured for package "cowsay"
0.652
And
I shutdown Tails and wait for the computer to power off
3.987
And
I start Tails from USB drive "__internal" with network unplugged
32.837
And
I enable persistence
11.315
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.036
And
I log in to a new session
7.588
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.159
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
I prepare the Additional Software upgrade process to fail
0.030
And
the network is plugged
0.031
And
available upgrades have been checked
0.077
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.876
And
I can open the Additional Software configuration window from the notification
2.642
And
I shutdown Tails and wait for the computer to power off
17.776
And
I start Tails from USB drive "__internal" with network unplugged
34.680
And
I enable persistence
15.022
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.544
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.191
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
the network is plugged
0.656
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.050