And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.646
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.460
And
I accept adding "cowsay" to Additional Software
3.987
And
Additional Software is correctly configured for package "cowsay"
0.469
And
I shutdown Tails and wait for the computer to power off
2.492
And
I start Tails from USB drive "__internal" with network unplugged
32.251
And
I enable persistence
10.503
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.036
And
I log in to a new session
7.520
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.141
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.023
And
available upgrades have been checked
0.033
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.276
And
I can open the Additional Software configuration window from the notification
2.365
And
I shutdown Tails and wait for the computer to power off
17.484
And
I start Tails from USB drive "__internal" with network unplugged
31.426
And
I enable persistence
10.481
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.779
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.170
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
the network is plugged
0.051
Then
the Additional Software upgrade service has started
0.039
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.050