And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.382
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.183
And
I accept adding "cowsay" to Additional Software
4.988
And
Additional Software is correctly configured for package "cowsay"
1.063
And
I shutdown Tails and wait for the computer to power off
2.676
And
I start Tails from USB drive "__internal" with network unplugged
35.102
And
I enable persistence
13.780
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
7.416
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.230
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.033
And
available upgrades have been checked
0.043
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.340
And
I can open the Additional Software configuration window from the notification
2.479
And
I shutdown Tails and wait for the computer to power off
12.826
And
I start Tails from USB drive "__internal" with network unplugged
34.960
And
I enable persistence
12.785
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
8.470
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.444
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.042
Then
the Additional Software upgrade service has started
0.077
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.088