And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.276
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.476
And
I accept adding "cowsay" to Additional Software
3.993
And
Additional Software is correctly configured for package "cowsay"
0.583
And
I shutdown Tails and wait for the computer to power off
4.067
And
I start Tails from USB drive "__internal" with network unplugged
33.333
And
I enable persistence
10.706
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
8.391
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.245
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.079
And
the network is plugged
0.023
And
available upgrades have been checked
0.043
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.788
And
I can open the Additional Software configuration window from the notification
2.595
And
I shutdown Tails and wait for the computer to power off
17.757
And
I start Tails from USB drive "__internal" with network unplugged
32.617
And
I enable persistence
11.837
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.787
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.145
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.031
Then
the Additional Software upgrade service has started
0.058
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.049