And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.527
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.493
And
I accept adding "cowsay" to Additional Software
4.066
And
Additional Software is correctly configured for package "cowsay"
0.574
And
I shutdown Tails and wait for the computer to power off
2.578
And
I start Tails from USB drive "__internal" with network unplugged
34.376
And
I enable persistence
11.749
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.040
And
I log in to a new session
6.757
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.178
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.037
And
the network is plugged
0.026
And
available upgrades have been checked
1.110
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.342
And
I can open the Additional Software configuration window from the notification
2.633
And
I shutdown Tails and wait for the computer to power off
12.740
And
I start Tails from USB drive "__internal" with network unplugged
31.969
And
I enable persistence
10.815
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.872
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.166
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.025
Then
the Additional Software upgrade service has started
0.067
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.095