And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.045
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.431
And
I accept adding "cowsay" to Additional Software
4.944
And
Additional Software is correctly configured for package "cowsay"
0.525
And
I shutdown Tails and wait for the computer to power off
3.959
And
I start Tails from USB drive "__internal" with network unplugged
33.620
And
I enable persistence
11.106
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.044
And
I log in to a new session
8.232
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.157
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.040
And
the network is plugged
0.028
And
available upgrades have been checked
0.045
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.296
And
I can open the Additional Software configuration window from the notification
2.618
And
I shutdown Tails and wait for the computer to power off
13.095
And
I start Tails from USB drive "__internal" with network unplugged
33.037
And
I enable persistence
10.828
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.743
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.191
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.025
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.051