And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.951
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.291
And
I accept adding "cowsay" to Additional Software
4.015
And
Additional Software is correctly configured for package "cowsay"
0.491
And
I shutdown Tails and wait for the computer to power off
2.616
And
I start Tails from USB drive "__internal" with network unplugged
31.792
And
I enable persistence
10.541
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.037
And
I log in to a new session
7.717
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.157
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.033
And
available upgrades have been checked
0.033
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.460
And
I can open the Additional Software configuration window from the notification
2.361
And
I shutdown Tails and wait for the computer to power off
17.648
And
I start Tails from USB drive "__internal" with network unplugged
31.651
And
I enable persistence
10.307
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
7.646
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.148
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.025
Then
the Additional Software upgrade service has started
0.050
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.039