And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.513
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.395
And
I accept adding "cowsay" to Additional Software
4.041
And
Additional Software is correctly configured for package "cowsay"
0.500
And
I shutdown Tails and wait for the computer to power off
4.005
And
I start Tails from USB drive "__internal" with network unplugged
34.185
And
I enable persistence
11.124
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.042
And
I log in to a new session
7.184
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.150
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.026
And
available upgrades have been checked
0.043
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.264
And
I can open the Additional Software configuration window from the notification
2.423
And
I shutdown Tails and wait for the computer to power off
13.046
And
I start Tails from USB drive "__internal" with network unplugged
32.167
And
I enable persistence
11.836
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.285
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.146
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
the network is plugged
0.033
Then
the Additional Software upgrade service has started
0.100
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.042