And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.458
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.536
And
I accept adding "cowsay" to Additional Software
4.086
And
Additional Software is correctly configured for package "cowsay"
0.557
And
I shutdown Tails and wait for the computer to power off
4.184
And
I start Tails from USB drive "__internal" with network unplugged
34.408
And
I enable persistence
12.768
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.049
And
I log in to a new session
8.221
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.207
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.028
And
available upgrades have been checked
0.039
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.314
And
I can open the Additional Software configuration window from the notification
2.518
And
I shutdown Tails and wait for the computer to power off
18.115
And
I start Tails from USB drive "__internal" with network unplugged
33.544
And
I enable persistence
12.004
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.507
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.154
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.042
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059