And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.637
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.051
And
I accept adding "cowsay" to Additional Software
4.790
And
Additional Software is correctly configured for package "cowsay"
0.510
And
I shutdown Tails and wait for the computer to power off
2.534
And
I start Tails from USB drive "__internal" with network unplugged
33.675
And
I enable persistence
11.352
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.045
And
I log in to a new session
8.560
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.194
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.031
And
available upgrades have been checked
0.038
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.353
And
I can open the Additional Software configuration window from the notification
2.410
And
I shutdown Tails and wait for the computer to power off
12.731
And
I start Tails from USB drive "__internal" with network unplugged
32.532
And
I enable persistence
11.673
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
7.976
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.170
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.070
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058