And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.143
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.279
And
I accept adding "cowsay" to Additional Software
4.085
And
Additional Software is correctly configured for package "cowsay"
0.452
And
I shutdown Tails and wait for the computer to power off
4.029
And
I start Tails from USB drive "__internal" with network unplugged
31.684
And
I enable persistence
10.458
And
I configure APT to prefer an old version of cowsay
0.008
And
I disable the tails-virt-notify-user.service user unit
0.046
And
I log in to a new session
6.516
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.188
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.040
And
the network is plugged
0.021
And
available upgrades have been checked
0.029
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.588
And
I can open the Additional Software configuration window from the notification
2.438
And
I shutdown Tails and wait for the computer to power off
12.434
And
I start Tails from USB drive "__internal" with network unplugged
31.679
And
I enable persistence
10.168
And
I configure APT to prefer an old version of cowsay
0.018
And
I log in to a new session
7.647
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.161
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.024
Then
the Additional Software upgrade service has started
0.033
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.052