And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.563
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.149
And
I accept adding "cowsay" to Additional Software
5.044
And
Additional Software is correctly configured for package "cowsay"
0.492
And
I shutdown Tails and wait for the computer to power off
4.042
And
I start Tails from USB drive "__internal" with network unplugged
34.657
And
I enable persistence
12.093
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
8.350
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.210
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.092
And
the network is plugged
0.051
And
available upgrades have been checked
1.101
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.581
And
I can open the Additional Software configuration window from the notification
2.599
And
I shutdown Tails and wait for the computer to power off
17.928
And
I start Tails from USB drive "__internal" with network unplugged
34.601
And
I enable persistence
11.874
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.454
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.170
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
the network is plugged
0.026
Then
the Additional Software upgrade service has started
0.042
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061