And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.083
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.714
And
I accept adding "cowsay" to Additional Software
4.862
And
Additional Software is correctly configured for package "cowsay"
0.600
And
I shutdown Tails and wait for the computer to power off
2.716
And
I start Tails from USB drive "__internal" with network unplugged
35.051
And
I enable persistence
13.312
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
7.575
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.272
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.040
And
available upgrades have been checked
0.045
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.268
And
I can open the Additional Software configuration window from the notification
2.830
And
I shutdown Tails and wait for the computer to power off
12.825
And
I start Tails from USB drive "__internal" with network unplugged
35.074
And
I enable persistence
11.351
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.595
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.264
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.049
Then
the Additional Software upgrade service has started
0.033
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.049