And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.980
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.392
And
I accept adding "cowsay" to Additional Software
5.380
And
Additional Software is correctly configured for package "cowsay"
0.566
And
I shutdown Tails and wait for the computer to power off
3.968
And
I start Tails from USB drive "__internal" with network unplugged
32.059
And
I enable persistence
11.207
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
7.007
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.162
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.039
And
available upgrades have been checked
1.083
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.364
And
I can open the Additional Software configuration window from the notification
2.375
And
I shutdown Tails and wait for the computer to power off
7.730
And
I start Tails from USB drive "__internal" with network unplugged
33.340
And
I enable persistence
11.665
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.786
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.134
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
the network is plugged
0.029
Then
the Additional Software upgrade service has started
0.100
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.069