And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.378
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.986
And
I accept adding "cowsay" to Additional Software
5.139
And
Additional Software is correctly configured for package "cowsay"
0.739
And
I shutdown Tails and wait for the computer to power off
4.018
And
I start Tails from USB drive "__internal" with network unplugged
34.733
And
I enable persistence
13.028
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.041
And
I log in to a new session
8.969
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.229
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.039
And
available upgrades have been checked
1.108
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.841
And
I can open the Additional Software configuration window from the notification
2.560
And
I shutdown Tails and wait for the computer to power off
18.229
And
I start Tails from USB drive "__internal" with network unplugged
33.124
And
I enable persistence
12.365
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.968
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.173
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.038
Then
the Additional Software upgrade service has started
0.087
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.050