And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.813
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.647
And
I accept adding "cowsay" to Additional Software
4.070
And
Additional Software is correctly configured for package "cowsay"
0.465
And
I shutdown Tails and wait for the computer to power off
2.530
And
I start Tails from USB drive "__internal" with network unplugged
31.368
And
I enable persistence
10.019
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.037
And
I log in to a new session
6.788
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.238
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.034
And
available upgrades have been checked
1.090
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.779
And
I can open the Additional Software configuration window from the notification
2.364
And
I shutdown Tails and wait for the computer to power off
13.968
And
I start Tails from USB drive "__internal" with network unplugged
32.732
And
I enable persistence
10.096
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.943
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.165
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.047
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.051