And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.888
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.529
And
I accept adding "cowsay" to Additional Software
4.807
And
Additional Software is correctly configured for package "cowsay"
0.515
And
I shutdown Tails and wait for the computer to power off
3.960
And
I start Tails from USB drive "__internal" with network unplugged
32.820
And
I enable persistence
11.429
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
7.830
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.195
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.037
And
available upgrades have been checked
1.075
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.353
And
I can open the Additional Software configuration window from the notification
2.416
And
I shutdown Tails and wait for the computer to power off
12.676
And
I start Tails from USB drive "__internal" with network unplugged
32.548
And
I enable persistence
10.803
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
6.810
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.156
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
the network is plugged
0.025
Then
the Additional Software upgrade service has started
0.064
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054