And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.397
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.095
And
I accept adding "cowsay" to Additional Software
4.906
And
Additional Software is correctly configured for package "cowsay"
0.569
And
I shutdown Tails and wait for the computer to power off
4.112
And
I start Tails from USB drive "__internal" with network unplugged
33.020
And
I enable persistence
11.104
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.039
And
I log in to a new session
7.885
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.233
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.036
And
available upgrades have been checked
1.065
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.485
And
I can open the Additional Software configuration window from the notification
2.391
And
I shutdown Tails and wait for the computer to power off
16.534
And
I start Tails from USB drive "__internal" with network unplugged
34.152
And
I enable persistence
12.637
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.032
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.188
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
the network is plugged
0.025
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054