And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.160
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.850
And
I accept adding "cowsay" to Additional Software
5.267
And
Additional Software is correctly configured for package "cowsay"
0.503
And
I shutdown Tails and wait for the computer to power off
2.614
And
I start Tails from USB drive "__internal" with network unplugged
33.027
And
I enable persistence
11.047
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.049
And
I log in to a new session
7.617
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.202
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.042
And
available upgrades have been checked
0.048
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.378
And
I can open the Additional Software configuration window from the notification
2.395
And
I shutdown Tails and wait for the computer to power off
17.647
And
I start Tails from USB drive "__internal" with network unplugged
32.476
And
I enable persistence
10.785
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.269
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.140
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.041
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064