And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.684
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.998
And
I accept adding "cowsay" to Additional Software
4.033
And
Additional Software is correctly configured for package "cowsay"
0.526
And
I shutdown Tails and wait for the computer to power off
4.069
And
I start Tails from USB drive "__internal" with network unplugged
32.291
And
I enable persistence
10.811
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.043
And
I log in to a new session
6.758
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.412
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.036
And
available upgrades have been checked
0.039
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.853
And
I can open the Additional Software configuration window from the notification
2.627
And
I shutdown Tails and wait for the computer to power off
12.671
And
I start Tails from USB drive "__internal" with network unplugged
33.730
And
I enable persistence
10.579
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.389
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.149
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.029
Then
the Additional Software upgrade service has started
0.041
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.053