And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.336
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.281
And
I accept adding "cowsay" to Additional Software
4.852
And
Additional Software is correctly configured for package "cowsay"
0.554
And
I shutdown Tails and wait for the computer to power off
4.198
And
I start Tails from USB drive "__internal" with network unplugged
38.814
And
I enable persistence
10.833
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
10.387
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.259
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.071
And
the network is plugged
0.022
And
available upgrades have been checked
1.128
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.046
And
I can open the Additional Software configuration window from the notification
2.570
And
I shutdown Tails and wait for the computer to power off
17.295
And
I start Tails from USB drive "__internal" with network unplugged
37.590
And
I enable persistence
11.345
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
12.033
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.205
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.058
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058