And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:25.644
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.893
And
I accept adding "cowsay" to Additional Software
4.898
And
Additional Software is correctly configured for package "cowsay"
0.676
And
I shutdown Tails and wait for the computer to power off
8.259
And
I start Tails from USB drive "__internal" with network unplugged
37.948
And
I enable persistence
10.803
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
10.498
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.224
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.017
And
available upgrades have been checked
1.129
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.017
And
I can open the Additional Software configuration window from the notification
2.655
And
I shutdown Tails and wait for the computer to power off
22.778
And
I start Tails from USB drive "__internal" with network unplugged
36.701
And
I enable persistence
10.386
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
10.856
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.212
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.061
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057