And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.820
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.702
And
I accept adding "cowsay" to Additional Software
4.928
And
Additional Software is correctly configured for package "cowsay"
0.659
And
I shutdown Tails and wait for the computer to power off
4.371
And
I start Tails from USB drive "__internal" with network unplugged
37.711
And
I enable persistence
9.231
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
10.586
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.221
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.076
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.016
And
available upgrades have been checked
2.208
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.464
And
I can open the Additional Software configuration window from the notification
2.551
And
I shutdown Tails and wait for the computer to power off
17.490
And
I start Tails from USB drive "__internal" with network unplugged
37.000
And
I enable persistence
9.170
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.562
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.233
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068