And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.370
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.638
And
I accept adding "cowsay" to Additional Software
3.680
And
Additional Software is correctly configured for package "cowsay"
0.580
And
I shutdown Tails and wait for the computer to power off
7.917
And
I start Tails from USB drive "__internal" with network unplugged
37.188
And
I enable persistence
5.671
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.049
And
I log in to a new session
9.015
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.216
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.040
And
the network is plugged
0.015
And
available upgrades have been checked
1.093
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.491
And
I can open the Additional Software configuration window from the notification
2.507
And
I shutdown Tails and wait for the computer to power off
22.227
And
I start Tails from USB drive "__internal" with network unplugged
36.391
And
I enable persistence
5.576
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
9.703
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.198
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.043
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056