And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.935
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.766
And
I accept adding "cowsay" to Additional Software
3.699
And
Additional Software is correctly configured for package "cowsay"
0.568
And
I shutdown Tails and wait for the computer to power off
3.913
And
I start Tails from USB drive "__internal" with network unplugged
36.301
And
I enable persistence
5.203
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
10.334
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.205
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.018
And
available upgrades have been checked
1.042
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.937
And
I can open the Additional Software configuration window from the notification
2.596
And
I shutdown Tails and wait for the computer to power off
22.068
And
I start Tails from USB drive "__internal" with network unplugged
36.247
And
I enable persistence
5.847
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.162
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.165
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.056
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054