And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.368
And
I configure APT to prefer an old version of cowsay
0.016
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.286
And
I accept adding "cowsay" to Additional Software
3.609
And
Additional Software is correctly configured for package "cowsay"
0.570
And
I shutdown Tails and wait for the computer to power off
7.976
And
I start Tails from USB drive "__internal" with network unplugged
36.045
And
I enable persistence
6.477
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.072
And
I log in to a new session
10.598
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.188
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.018
And
available upgrades have been checked
1.094
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.494
And
I can open the Additional Software configuration window from the notification
2.495
And
I shutdown Tails and wait for the computer to power off
13.069
And
I start Tails from USB drive "__internal" with network unplugged
34.762
And
I enable persistence
6.219
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.778
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.211
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060