And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.039
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.909
And
I accept adding "cowsay" to Additional Software
5.024
And
Additional Software is correctly configured for package "cowsay"
0.746
And
I shutdown Tails and wait for the computer to power off
8.322
And
I start Tails from USB drive "__internal" with network unplugged
39.063
And
I enable persistence
5.900
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.072
And
I log in to a new session
12.148
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.220
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.082
And
the network is plugged
0.022
And
available upgrades have been checked
2.136
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.557
And
I can open the Additional Software configuration window from the notification
2.584
And
I shutdown Tails and wait for the computer to power off
4.200
And
I start Tails from USB drive "__internal" with network unplugged
39.675
And
I enable persistence
7.194
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.817
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.203
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.063
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.072