And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.018
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.940
And
I accept adding "cowsay" to Additional Software
5.038
And
Additional Software is correctly configured for package "cowsay"
0.844
And
I shutdown Tails and wait for the computer to power off
8.241
And
I start Tails from USB drive "__internal" with network unplugged
38.533
And
I enable persistence
6.185
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
11.058
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.505
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.014
And
available upgrades have been checked
2.214
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.457
And
I can open the Additional Software configuration window from the notification
2.532
And
I shutdown Tails and wait for the computer to power off
17.380
And
I start Tails from USB drive "__internal" with network unplugged
37.579
And
I enable persistence
6.557
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
12.070
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.271
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.030
Then
the Additional Software upgrade service has started
0.059
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060