And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:49.664
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.964
And
I accept adding "cowsay" to Additional Software
4.906
And
Additional Software is correctly configured for package "cowsay"
0.853
And
I shutdown Tails and wait for the computer to power off
8.287
And
I start Tails from USB drive "__internal" with network unplugged
38.567
And
I enable persistence
6.857
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.091
And
I log in to a new session
10.899
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.276
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.093
And
the network is plugged
0.020
And
available upgrades have been checked
2.228
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.049
And
I can open the Additional Software configuration window from the notification
2.580
And
I shutdown Tails and wait for the computer to power off
12.294
And
I start Tails from USB drive "__internal" with network unplugged
38.218
And
I enable persistence
6.706
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.652
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.232
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.051
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060