And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.636
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.947
And
I accept adding "cowsay" to Additional Software
4.796
And
Additional Software is correctly configured for package "cowsay"
0.611
And
I shutdown Tails and wait for the computer to power off
8.453
And
I start Tails from USB drive "__internal" with network unplugged
39.393
And
I enable persistence
7.135
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
11.249
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.221
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.020
And
available upgrades have been checked
1.122
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.980
And
I can open the Additional Software configuration window from the notification
2.613
And
I shutdown Tails and wait for the computer to power off
23.104
And
I start Tails from USB drive "__internal" with network unplugged
40.051
And
I enable persistence
6.956
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.452
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.275
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.026
Then
the Additional Software upgrade service has started
0.063
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.111