And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.944
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.640
And
I accept adding "cowsay" to Additional Software
3.723
And
Additional Software is correctly configured for package "cowsay"
0.631
And
I shutdown Tails and wait for the computer to power off
7.876
And
I start Tails from USB drive "__internal" with network unplugged
36.820
And
I enable persistence
5.538
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
9.753
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.220
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.014
And
available upgrades have been checked
2.212
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.513
And
I can open the Additional Software configuration window from the notification
2.608
And
I shutdown Tails and wait for the computer to power off
22.453
And
I start Tails from USB drive "__internal" with network unplugged
37.215
And
I enable persistence
5.629
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.457
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.544
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.062
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075