And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:51.681
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.494
And
I accept adding "cowsay" to Additional Software
5.110
And
Additional Software is correctly configured for package "cowsay"
0.752
And
I shutdown Tails and wait for the computer to power off
8.344
And
I start Tails from USB drive "__internal" with network unplugged
38.926
And
I enable persistence
6.619
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
12.000
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.607
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.016
And
available upgrades have been checked
1.101
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.052
And
I can open the Additional Software configuration window from the notification
2.642
And
I shutdown Tails and wait for the computer to power off
17.797
And
I start Tails from USB drive "__internal" with network unplugged
39.375
And
I enable persistence
6.823
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.250
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.190
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.067
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067