And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.032
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.252
And
I accept adding "cowsay" to Additional Software
5.082
And
Additional Software is correctly configured for package "cowsay"
0.687
And
I shutdown Tails and wait for the computer to power off
8.403
And
I start Tails from USB drive "__internal" with network unplugged
39.339
And
I enable persistence
7.109
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
10.359
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.213
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.016
And
available upgrades have been checked
1.133
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.056
And
I can open the Additional Software configuration window from the notification
2.613
And
I shutdown Tails and wait for the computer to power off
13.985
And
I start Tails from USB drive "__internal" with network unplugged
41.449
And
I enable persistence
6.653
And
I configure APT to prefer an old version of cowsay
0.008
And
I log in to a new session
11.983
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.552
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.046
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061