And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.665
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.836
And
I accept adding "cowsay" to Additional Software
4.972
And
Additional Software is correctly configured for package "cowsay"
0.674
And
I shutdown Tails and wait for the computer to power off
4.229
And
I start Tails from USB drive "__internal" with network unplugged
37.898
And
I enable persistence
6.939
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
10.936
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.212
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.022
And
available upgrades have been checked
1.085
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.634
And
I can open the Additional Software configuration window from the notification
2.586
And
I shutdown Tails and wait for the computer to power off
2:7.707
And
I start Tails from USB drive "__internal" with network unplugged
38.624
And
I enable persistence
5.701
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
12.343
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.262
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.076
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.078