And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.901
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.451
And
I accept adding "cowsay" to Additional Software
4.836
And
Additional Software is correctly configured for package "cowsay"
0.735
And
I shutdown Tails and wait for the computer to power off
4.186
And
I start Tails from USB drive "__internal" with network unplugged
39.651
And
I enable persistence
7.419
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.044
And
I log in to a new session
12.287
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.306
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.030
And
available upgrades have been checked
2.216
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.611
And
I can open the Additional Software configuration window from the notification
2.680
And
I shutdown Tails and wait for the computer to power off
17.971
And
I start Tails from USB drive "__internal" with network unplugged
40.776
And
I enable persistence
7.111
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.509
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.217
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067